Skip to product information
1 of 8

True Hop GATE PUMP servo developed for 10A BEC at 8.4V

True Hop GATE PUMP servo developed for 10A BEC at 8.4V

Regular price $119.99 USD
Regular price Sale price $119.99 USD
Sale Sold out
Tax included. Shipping calculated at checkout.
The True Hop Gate Pump servo is developed to make the rear of your RC Lowrider pop and lock! But make no mistake this servo make the front HOP Big Time as well and is therefore a great improvement over the stock servo.

Use with a 10A (20a) BEC set at max. 8.4V.
Ridiculously Fast and Powerfull!!

NOW 180° throw with Radio set at 120%-120%!
Powered by AGFRC!


Specs:
Voltage: 7.4V- 8.4V Do not exceed!
Gears: Super Steel Gears
Bearing: 3 HQ Ball Bearings
Operating Temperature: -15°C - +70°C
Pulse / Frequency: 1520uS/ 333Hz
Operating Speed: 0.053sec/60° @ 7.4V 0.043sec/60° @ 8.4V 
Static Holding Torque: 21.0 kg-cm (292 oz-in) @ 7.4V 24.0 kg-cm (333 oz-in) @ 8.4V
Size: 40*20*37.2mm 1.57*78*1.46inch
Motor Type: Brushless
Spline: 25T/ Dead Band Width 2uSec

For Best results:
- To make the rear bounce use stiff shocks depending on the weight you use in the trunk.
- Use longer servo horns and shorter shocks to make the car lay low while still be able to lock up high.
- Always adjust endpoints!! Make sure there's no binding (humming noise).


NOTE:
- These Gate Pump servo's are for experienced users only! 

- Always adjust the endpionts to make sure there's no binding (humming noise).
- Let these servo's cool down in between sessions.

WARRANTY DOES NOT COVER BURNED OUT SERVOS!!
BURNED OUT SERVOS ARE CAUSED BY INCORRECT ENDPOINTS SETTINGS AND/OR THE SERVO HORN GETTING STUCK BY SOMETHING LIKE A LOSE BOLT OR WIRING.
View full details